1. Plastic cosmetic bottles are usually made of PP, PE, K material, AS, ABS, acrylic, PET, etc.
2. It is usually used for injection molding of Cream Plastic bottles, bottle caps, corks, gaskets, pump heads cosmetics bottle, and dust covers with thicker walls of cosmetic containers; PET blowing is two-step molding, tube embryos are injection molding, and finished product packaging For bottle blowing. Others such as lotion bottles and washing bottles with thinner container walls are blown bottles.
3. PET material is an environmentally friendly material with high barrier properties, light weight, unbreakable properties, chemical resistance, and strong transparency. It can be made into pearlescent, colored, magnetic white, and transparent. It is widely used in gel water. The mouth of the bottle is generally the standard 16#, 18#, 22#, 24# caliber, which can be used with a pump head.
4. The acrylic material is injection molded bottle, which has poor chemical resistance. Generally, the paste cannot be filled directly. It needs to be equipped with an inner liner to block it. In order to avoid cracks, the packaging requirements during transportation are relatively high, because it looks particularly obvious after being scratched, has high permeability, and feels very thick on the upper wall, but the price is quite expensive, such as our Acrylic cream bottle.
5. AS, ABS: AS has better transparency than ABS, and has better toughness.
6. Mold development cost: bottle blowing mold is 1,500-4,000 yuan, injection mold is 8,000-20,000 yuan, the stainless steel material for the mold is more expensive than the alloy material, but it is durable. How many molds are produced at a time, see The demand for production volume, if the production volume is large, you can choose a four-out mold or a six-out mold, and the customer can decide by himself.
7. The order quantity is generally 3,000-10,000 pieces, and the color can be customized. Usually, the primary color is matte and magnetic white, or the effect of pearl powder is added. The materials used are different, and the colors shown are somewhat different.
8. There are ordinary ink and UV ink for silk screen printing. UV ink has better effect, glossy and three-dimensional effect. During production, you should make a plate to confirm the color. The effect of silk screen printing on different materials will be different.
9. Hot stamping, hot silver and other processing techniques are different from printing gold powder and silver powder. The hard material and smooth surface are more suitable for hot stamping and silver hot stamping. The soft surface hot stamping effect is not good and it is easy to fall off. It is better than printing gold and silver.
10. Bottle caps are generally equipped with inner gaskets, pull caps, and inner plugs, and very few are equipped with spoons or droppers. This is mainly due to their airtightness and ease of use.
11. The production cycle is relatively moderate, about 15 days. The silk screen printing cylindrical bottle is calculated as a single color, and the flat bottle or special-shaped bottle is calculated as a two-color or multi-color. Usually, the first screen printing screen fee or fixture fee is charged. Silk screen printing The unit price is generally 0.08 yuan/color time to 0.1 yuan/color time, the screen version is 100-200 yuan/style, and the fixture is about 50 yuan/piece.
Post time: Dec-28-2022
